Bobbin for EEW Nano 2 Electric Spinning Wheel / Bobbin for EEW Nano 2.0 / Accessory for EEW Nano 2 / Eew Nano 2 Bobbin Spare / Electric Eel
Bobbin for EEW Nano 2 Electric Spinning Wheel / Bobbin for EEW Nano 2.0 / Accessory for EEW Nano 2 / Eew Nano 2 Bobbin Spare / Electric Eel
This is a spare bobbin for the EEW Nano 2.0 by Maurice Ribble of Dreaming Robots (https://www.dreamingrobots.com/eew-nano/)
You're purchasing:
One spare bobbin for the EEW Nano 2.0.
Colour options:
You can have them made with any of the following colours:- black, purple, orange, green or white.
Please select your choice of colour from the drop down list.
Actual colours may vary. Due to various monitor / phone settings such as brightness and contrast, screens display colour differently so our products may look slightly different in person from what you see on your screen. We try our best to make sure that our photos are as accurate as possible, but the actual colour may vary slightly from what you see online. Brighton3D will not accept responsibility for any colour or design differences that are not factory faults.
Size:
The bobbin comes in three parts - two threaded ends and a threaded centre tube, that screw together.
Bobbins are 78mm tall and 60mm in diameter with a 10mm hole through the centre. Manufactured in tough plastic.
Manufacture and materials:
The bobbins are 3D printed, which leaves a texture on the top surface and layer lines on the sides.
The plastic used called PLA (Polylactic acid) and are derived from renewable fermented plant starches e.g. corn, cassava, sugarcane or sugar beet pulp.
Postage:
Your bobbin will be packaged well to protect it on it's way to you and sent with tracked postage for you.
Please ensure you take note of our dispatch dates when placing your order and if anything is needed urgently please contact us so that we can make sure your item arrives in plenty of time.
We have other items available for EEW 2 as well.
This design is from "EEW Nano Bobbin" (https://www.thingiverse.com/thing:3262290) by mribble, where it is downloadable, and is licensed under the "Creative Commons - Attribution - Share Alike" license (https://creativecommons.org/licenses/by-sa/3.0/).
N.B We are also able to make custom items, please do not hesitate to contact us if you have something in mind.
Bobbin for EEW Nano 2 Electric Spinning Wheel / Bobbin for EEW Nano 2.0 / Accessory for EEW Nano 2 / Eew Nano 2 Bobbin Spare / Electric Eel
This is a spare bobbin for the EEW Nano 2.0 by Maurice Ribble of Dreaming Robots (https://www.dreamingrobots.com/eew-nano/)
You're purchasing:
One spare bobbin for the EEW Nano 2.0.
Colour options:
You can have them made with any of the following colours:- black, purple, orange, green or white.
Please select your choice of colour from the drop down list.
Actual colours may vary. Due to various monitor / phone settings such as brightness and contrast, screens display colour differently so our products may look slightly different in person from what you see on your screen. We try our best to make sure that our photos are as accurate as possible, but the actual colour may vary slightly from what you see online. Brighton3D will not accept responsibility for any colour or design differences that are not factory faults.
Size:
The bobbin comes in three parts - two threaded ends and a threaded centre tube, that screw together.
Bobbins are 78mm tall and 60mm in diameter with a 10mm hole through the centre. Manufactured in tough plastic.
Manufacture and materials:
The bobbins are 3D printed, which leaves a texture on the top surface and layer lines on the sides.
The plastic used called PLA (Polylactic acid) and are derived from renewable fermented plant starches e.g. corn, cassava, sugarcane or sugar beet pulp.
Postage:
Your bobbin will be packaged well to protect it on it's way to you and sent with tracked postage for you.
Please ensure you take note of our dispatch dates when placing your order and if anything is needed urgently please contact us so that we can make sure your item arrives in plenty of time.
We have other items available for EEW 2 as well.
This design is from "EEW Nano Bobbin" (https://www.thingiverse.com/thing:3262290) by mribble, where it is downloadable, and is licensed under the "Creative Commons - Attribution - Share Alike" license (https://creativecommons.org/licenses/by-sa/3.0/).
N.B We are also able to make custom items, please do not hesitate to contact us if you have something in mind.
Bobbin for EEW Nano 2 Electric Spinning Wheel / Bobbin for EEW Nano 2.0 / Accessory for EEW Nano 2 / Eew Nano 2 Bobbin Spare / Electric Eel
This is a spare bobbin for the EEW Nano 2.0 by Maurice Ribble of Dreaming Robots (https://www.dreamingrobots.com/eew-nano/)
You're purchasing:
One spare bobbin for the EEW Nano 2.0.
Colour options:
You can have them made with any of the following colours:- black, purple, orange, green or white.
Please select your choice of colour from the drop down list.
Actual colours may vary. Due to various monitor / phone settings such as brightness and contrast, screens display colour differently so our products may look slightly different in person from what you see on your screen. We try our best to make sure that our photos are as accurate as possible, but the actual colour may vary slightly from what you see online. Brighton3D will not accept responsibility for any colour or design differences that are not factory faults.
Size:
The bobbin comes in three parts - two threaded ends and a threaded centre tube, that screw together.
Bobbins are 78mm tall and 60mm in diameter with a 10mm hole through the centre. Manufactured in tough plastic.
Manufacture and materials:
The bobbins are 3D printed, which leaves a texture on the top surface and layer lines on the sides.
The plastic used called PLA (Polylactic acid) and are derived from renewable fermented plant starches e.g. corn, cassava, sugarcane or sugar beet pulp.
Postage:
Your bobbin will be packaged well to protect it on it's way to you and sent with tracked postage for you.
Please ensure you take note of our dispatch dates when placing your order and if anything is needed urgently please contact us so that we can make sure your item arrives in plenty of time.
We have other items available for EEW 2 as well.
This design is from "EEW Nano Bobbin" (https://www.thingiverse.com/thing:3262290) by mribble, where it is downloadable, and is licensed under the "Creative Commons - Attribution - Share Alike" license (https://creativecommons.org/licenses/by-sa/3.0/).
N.B We are also able to make custom items, please do not hesitate to contact us if you have something in mind.
