6 in 1 Level, Speed Square, Carpenters Square, Engineers Square, Straight Edge and Hex Bit Holder Mount Kit for Milwaukee Packout Corner Rail System
6 in 1 Level, Speed Square, Carpenters Square, Engineers Square, Straight Edge and Hex Bit Holder Mount Kit for Milwaukee Packout Corner Rail System
This Packout rail mount allows you to carry six items in a side mount, these are:
Two levels up to 35mm by 68mm
Rafter Set Square/ Framing Square up to 180mm x 6mm
Two of the following: A straight Edge, an engineers Square or a carpenters Square up to 55mm x 4mm
Six standard hex bits
Two machine screws hold the mount firmly in place without having to remove the rail, drill holes in the rail or even marking the rail up with a set screw.
Comes in a left or right hand configuration, depending on your preference for your Milwaukee Packout case stack.
You're purchasing:
One Level Holder Mount Kit for the Milwaukee Packout Rail Mount with required machine screws.
Colour options:
You can have them in red, black, grey or orange but can be customised in a different colour if needed - contact us with requirements. Please select your choice of colour from the drop down list.
Size:
The two kits consist or a top and bottom part and each piece is 231mm long, 116mm deep and 39mm tall. The clamp section is 52mm wide, 23mm deep and 39mm tall.
Manufactured in PETG plastic.
Manufacture and materials:
The mounts are 3D printed, which leaves a texture on the top surface and layer lines on the sides.
We design our products for strength and 3D print them for durability
The plastic used is called PETG (Polyethylene Terephthalate Glycol), a thermoplastic polyester that provides good durability, heat resistance, strength and excellent printability for manufacturing.
The hardware parts are a M4 25mm machine screws with M4 square nuts used in drop-in slots.
Postage:
Your mount(s) will be packaged in a suitably sized box to protect your order whilst on its way to you.
Orders will be posted to you second class unless the first class postage upgrade option is selected.
Please ensure you take note of our dispatch dates when placing your order and if anything is needed urgently please contact us so that we can make sure your item arrives in plenty of time.
Discounts are available for buying multiple items and we always combine postage.
6 in 1 Level, Speed Square, Carpenters Square, Engineers Square, Straight Edge and Hex Bit Holder Mount Kit for Milwaukee Packout Corner Rail System
This Packout rail mount allows you to carry six items in a side mount, these are:
Two levels up to 35mm by 68mm
Rafter Set Square/ Framing Square up to 180mm x 6mm
Two of the following: A straight Edge, an engineers Square or a carpenters Square up to 55mm x 4mm
Six standard hex bits
Two machine screws hold the mount firmly in place without having to remove the rail, drill holes in the rail or even marking the rail up with a set screw.
Comes in a left or right hand configuration, depending on your preference for your Milwaukee Packout case stack.
You're purchasing:
One Level Holder Mount Kit for the Milwaukee Packout Rail Mount with required machine screws.
Colour options:
You can have them in red, black, grey or orange but can be customised in a different colour if needed - contact us with requirements. Please select your choice of colour from the drop down list.
Size:
The two kits consist or a top and bottom part and each piece is 231mm long, 116mm deep and 39mm tall. The clamp section is 52mm wide, 23mm deep and 39mm tall.
Manufactured in PETG plastic.
Manufacture and materials:
The mounts are 3D printed, which leaves a texture on the top surface and layer lines on the sides.
We design our products for strength and 3D print them for durability
The plastic used is called PETG (Polyethylene Terephthalate Glycol), a thermoplastic polyester that provides good durability, heat resistance, strength and excellent printability for manufacturing.
The hardware parts are a M4 25mm machine screws with M4 square nuts used in drop-in slots.
Postage:
Your mount(s) will be packaged in a suitably sized box to protect your order whilst on its way to you.
Orders will be posted to you second class unless the first class postage upgrade option is selected.
Please ensure you take note of our dispatch dates when placing your order and if anything is needed urgently please contact us so that we can make sure your item arrives in plenty of time.
Discounts are available for buying multiple items and we always combine postage.
6 in 1 Level, Speed Square, Carpenters Square, Engineers Square, Straight Edge and Hex Bit Holder Mount Kit for Milwaukee Packout Corner Rail System
This Packout rail mount allows you to carry six items in a side mount, these are:
Two levels up to 35mm by 68mm
Rafter Set Square/ Framing Square up to 180mm x 6mm
Two of the following: A straight Edge, an engineers Square or a carpenters Square up to 55mm x 4mm
Six standard hex bits
Two machine screws hold the mount firmly in place without having to remove the rail, drill holes in the rail or even marking the rail up with a set screw.
Comes in a left or right hand configuration, depending on your preference for your Milwaukee Packout case stack.
You're purchasing:
One Level Holder Mount Kit for the Milwaukee Packout Rail Mount with required machine screws.
Colour options:
You can have them in red, black, grey or orange but can be customised in a different colour if needed - contact us with requirements. Please select your choice of colour from the drop down list.
Size:
The two kits consist or a top and bottom part and each piece is 231mm long, 116mm deep and 39mm tall. The clamp section is 52mm wide, 23mm deep and 39mm tall.
Manufactured in PETG plastic.
Manufacture and materials:
The mounts are 3D printed, which leaves a texture on the top surface and layer lines on the sides.
We design our products for strength and 3D print them for durability
The plastic used is called PETG (Polyethylene Terephthalate Glycol), a thermoplastic polyester that provides good durability, heat resistance, strength and excellent printability for manufacturing.
The hardware parts are a M4 25mm machine screws with M4 square nuts used in drop-in slots.
Postage:
Your mount(s) will be packaged in a suitably sized box to protect your order whilst on its way to you.
Orders will be posted to you second class unless the first class postage upgrade option is selected.
Please ensure you take note of our dispatch dates when placing your order and if anything is needed urgently please contact us so that we can make sure your item arrives in plenty of time.
Discounts are available for buying multiple items and we always combine postage.
