Fan Base with 40mm USB Fan for EEW Nano Spinning Wheel - EEW Nano

Fan Base with 40mm USB Fan for EEW Nano Spinning Wheel - EEW Nano

Purple
£15.00
Skip to product information
Fan Base with 40mm USB Fan for EEW Nano Spinning Wheel - EEW Nano

Fan Base with 40mm USB Fan for EEW Nano Spinning Wheel - EEW Nano

£15.00
Primary colour

EEW Nano Spinning Wheel Fan Base, Fan Base with 40mm USB Fan for EEW Nano Spinning Wheel - Eew Nano, Eew Accessory, Eew Fan Base

The EEW Fan base is 124mm long, 89mm wide and 18mm tall and comes with rubberised non-slip feet and four screws to hold the EEW Nano to the base.

Comes with a 40mm x 10mm USB powered fan that can plug into any USB power source (e.g. a portable phone charger or USB phone adapter).  USB fan cable is 30cm long so a portable phone charger might be a better option for mobility.

EEW Nano by Maurice Ribble of Dreaming Robots (https://www.dreamingrobots.com/product/eew-nano/)

You're purchasing:
One EEW Nano Spinning Wheel Fan Base with 40mm USB Fan for the EEW Nano Spinning Wheel.

Colour options:
You can have them made with any colour required from the drop down menu - the name and number are in white to ensure they stand out more. 

We have the following colours available:- yellow, pink, orange, purple, blue, red, black and purple.

Actual colours may vary. Due to various monitor / phone settings such as brightness and contrast, screens display colour differently so our products may look slightly different in person from what you see on your screen.  We try our best to make sure that our photos are as accurate as possible, but the actual colour may vary slightly from what you see online.  Brighton3D will not accept responsibility for any colour or design differences that are not factory faults.

Please select your choice of colour from the drop down list and advise the name you would like in the personalisation section.

Size:
Fan base is 124mm long, 89mm wide and 18mm tall and comes with rubberised non-slip feet and four screws to hold the EEW Nano to the base. Manufactured in tough plastic.

Manufacture and materials:
They are 3D printed, which leaves a texture on the top surface and layer lines on the sides.

The plastic used called PLA (Polylactic acid) and are derived from renewable fermented plant starches e.g. corn, cassava, sugarcane or sugar beet pulp.o, Eew Accessory, Eew Fan Base

EEW Nano by Maurice Ribble of Dreaming Robots (https://www.dreamingrobots.com/product/eew-nano/)

You may also like